!
"#$$$
www.honeywell.com/sensing sensing and control interactive catalog...
manual switches tl series toggle switches 1 2 2 honeywel l 1 micr o switc h sensin g an d contro l 1 1 -800-537-694 5 us a 1 f 1 - 8 1 5-235-684 7 internationa l 1 1 -800-737-336 0 canada features 1 qualified to mil-s-3950 1 environment-proof sealing 1 1, 2, and 4 pole circuitry. 1 standard and pull to unlock levers. 1 2 and 3 position, maintained, and momentary toggle action. 1 temperature range: 85 fto + 160 f (65 cto + 71 c). 1 ul recognized, csa certified. 1 ce approved construction tl's have high strength, temperature re- sistant, non-tracking case material and silver cadmium oxide contacts. actuator options standard toggle lever operates on a di- rect action spring loaded toggle mecha- nism to provide excellent tactile feedback in both the momentary and maintained toggle positions. the toggle lever is ap- proximately .68 in. (16 mm) long and has a non-glare matte nickel plated finish. pull-to-unlock toggle levers prevent acci- dental toggle movement. the knobbed toggle lever must be pulled out approxi- mately .09 in. (2,3 mm) to change posi- tions. thirteen different locking configu- rations are available. this lever style also has a non-glare matte nickel finish. colored tab levers (not shown) can also be furnished. they have the same ap- pearance as the tab lever shown in the tw phot o o n pag e 119 . cal l th e 80 0 number. electrical ratings (in amperes) elec. rating code 115 vac 28 vdc 115 vdc 250 vdc 60 & 400 hz 230 vac ind. res. lamp res. res. ind. res. lamp res. 1 1 5 2 0 5 0.75 0.5 10 15 3 6 2 1 0 1 5 4 0.75 0.5 7 1 5 2 6 3 1 5 2 0 7 0.75 0.5 15 15 4 6 4 1 0 1 8 5 0.75 0.5 8 1 1 2 6 5 1 2 2 0 5 0.75 0.5 15 15 4 6 6 1 0 1 8 4 0.75 0.5 8 1 1 2 6 ul/csa rating code electrical rating l192 10 amps125, 250, 277 vac; 1 4 hp-125 vac; 1 2 hp-250, 277 vac 3 amps-125 vac `` l'' l191 15 amps125, 250, 277 vac; 1 2 hp-125 vac; 1 hp-250, 277 vac 5 amps-120 vac `` l'' application note: honeywell micro switch does not recommend the use of silver cadmium oxide switch contacts in non-arcing loads. non-arcing loads are generally loads less than 12 volts and/or 0.5 amp. tl switches use silver cadmium oxide contacts. for other options, contact the micro switch application center at 1-800-537-6945.
manual switches tl series toggle switches honeywel l 1 micr o switc h sensin g an d contro l 1 1 -800-537-694 5 us a 1 f 1 - 8 1 5-235-684 7 internationa l 1 1 -800-737-336 0 canad a 123 terminal circuit identification terminal identifications are referred to in the order guides to indicate which circuits are made in each toggle position (i.e., 1-2 refers to circuit closure through terminals 1 and 2). one pole two pole four pole terminals in addition to the screw terminal switches listed in the order guides, iwts integrat- ed wire termination system versions (covered in micro switch catalog 80) and solder turret terminals are available. contact the 800 number. special circuitries catalog listings with -10, -50, and -70 suf- fix numbers shown in the order guides have special ``on-on-on'' circuits, as il- lustrated. tls with -12 suffix are the same as -50 except the keyway position is main- tained, and in the center position circuits 2-3 and 4-5 are made; -72 is the same as -50 except that the opposite keyway posi- tion is momentary, and in the center posi- tion circuits 2-3 and 4-5 are made. 10 circuitry no. of keyway side center opposite keyway poles maint. position maint. position maint. position 2 4 50 circuitry no. of keyway side center opposite keyway poles mom. position maint. position maint. position 2 4 70 circuitry no. of keyway side center opposite keyway poles mom. position maint. position mom. position 2 4 accessories colored lever sleeves, decorative mount- ing hardware, and panel seal accessories ar e show n o n pag e 135 . toggle/rockers
manual switches tl series toggle switches 1 2 4 honeywel l 1 micr o switc h sensin g an d contro l 1 1 -800-537-694 5 us a 1 f 1 - 8 1 5-235-684 7 internationa l 1 1 -800-737-336 0 canada 2-position order guide circuit(s) made with toggle at: standard toggle pull-to-unlock toggle electrical ul/csa add suffix to no. of keyway opposite rating rating catalog military standard military poles position keyway code code listing number toggle listing number ** 1 off 2-3 1 l191 1tl1-2 ms24523-22 d, f, g ms24658-22 off* 2-3 2 l192 1tl1-4 ms24523-29 f ms24658-29 1-2* off 2 l192 1tl1-6 ms24523-30 f ms24658-30 1-2 2-3 1 l191 1tl1-3 ms24523-23 d, f, g ms24658-23 1-2* 2-3 2 l192 1tl1-8 ms24523-26 f ms24658-26 2 off 2-3, 5-6 3 l191 2tl1-2 ms24524-22 d, f, g ms24659-22 off* 2-3, 5-6 4 l192 2tl1-4 ms24524-29 f ms24659-29 1-2, 4-5* off 4 l192 2tl1-6 ms24524-30 f ms24659-30 1-2, 4-5 2-3, 5-6 3 l191 2tl1-3 ms24524-23 d, f, g ms24659-23 1-2. 4-5* 2-3, 5-6 4 l192 2tl1-8 ms24524-26 f ms24659-26 4 off 2-3, 5-6 5 l191 4tl1-2 ms24525-22 d, f, g ms24660-22 8-9, 11-12 off* 2-3, 5-6 6 l192 4tl1-4 ms24525-29 f ms24660-29 8-9, 11-12 1-2, 4-5 off 6 l192 4tl1-6 ms24525-30 f ms24660-30 7-8, 10-11* 1-2, 4-5 2-3, 5-6 5 l191 4tl1-3 ms24525-23 d, f, g ms24660-23 7-8, 10-11 8-9, 11-12 1-2, 4-5* 2-3, 5-6 6 l192 4tl1-8 ms24525-26 f ms24660-26 7-8, 10-11 8-9, 11-12 * these positions only are momentary. all others are maintained. ** also add the appropriate suffix letter to the military number. pull-to-unlock option when ordering pull-to-unlock toggle list- ings, add the suffix letter shown in the chart below to the standard toggle listing and the ms number. for example, to or- der a 1TL1-1 pull-to-unlock toggle switch with the lever locked in the center posi- tion, add the letter e ; i.e., 1t l1-1 e , ms-24658-21 e. locking configurations abdefgh locked in locked out of center and locked out locked in locked in center and locked in extreme position of center locked in extreme position extreme position extreme position three positions (keyway side) position center position (opposite keyway) (keyway side) (keyway side) jklmnp locked out of locked in locked out of locked out of center and center and locked out of and into locked out of and into extreme position extreme position extreme position extreme position extreme position extreme position (opposite keyway) (opposite keyway) (keyway side) (opposite keyway) (opposite keyway) (keyway side)
manual switches tl series toggle switches honeywel l 1 micr o switc h sensin g an d contro l 1 1 -800-537-694 5 us a 1 f 1 - 8 1 5-235-684 7 internationa l 1 1 -800-737-336 0 canad a 125 3-position order guide circuit(s) made with toggle at: standard toggle pull-to-unlock toggle elec. ul/csa add suffix to no. of keyway center opposite rating rating catalog military standard military poles position position keyway code code listing number*** toggle listing number*** 1 1-2 off 2-3 1 l191 1TL1-1 ms24523-21 all types ms24658-21 1-2* off 2-3 2 l192 1tl1-5 ms24523-31 e, f, k, l, m, n ms24658-31 1-2* off 2-3* 2 l192 1tl1-7 ms24523-27 e, l, n ms24658-27 none** off 2-3 1 l191 1tl1-21 ms24523-24 e, f, k, m ms24658-24 none** 1-2 2-3 1 l192 1tl1-31 ms24523-33 e, f, k, m ms24658-33 none** 1-2 2-3* 2 l192 1tl1-51 ms24523-32 e ms24658-32 1-2* off none** 2 l192 1tl1-61 ms24523-28 e ms24658-28 2 1-2, 4-5 off 2-3, 5-6 3 l191 2tl1-1 ms24524-21 all types ms24659-21 1-2, 4-5* off 2-3, 5-6 4 l192 2tl1-5 ms24524-31 e, f, k, l, m, n ms24659-31 1-2, 4-5* off 2-3, 5-6* 4 l192 2tl1-7 ms24524-27 e, l, n ms24659-27 none** off 2-3, 5-6 3 l191 2tl1-21 ms24524-24 e, f, k, m ms24659-24 none** 1-2, 4-5 2-3, 5-6 3 l191 2tl1-31 ms24524-33 e, f, k, m ms24659-33 none** 1-2, 4-5 2-3, 5-6* 4 l192 2tl1-51 ms24524-32 e ms24659-32 1-2, 4-5* off none** 4 l192 2tl1-61 ms24524-28 e ms24659-28 1-2, 4-5 1-2, 5-6 2-3, 5-6 3 l191 2tl1-10 ms27407-4 all types ms27408-4 1-2, 4-5* 1-2, 5-6 2-3, 5-6 4 l192 2tl1-50 ms27407-5 e, f, k, l, m, n ms27408-5 1-2, 4-5* 1-2, 5-6 2-3, 5-6* 4 l192 2tl1-70 ms27407-6 e, l, n ms27408-6 4 1-2, 4-5 off 2-3, 5-6 5 l191 4tl1-1 ms24525-21 all types ms24660-21 7-8, 10-11 8-9, 11-12 1-2, 4-5 off 2-3, 5-6 6 l192 4tl1-5 ms24525-31 e, f, k, l, m, n ms24660-31 7-8, 10-11* 8-9, 11-12 1-2, 4-5 off 2-3, 5-6 6 l192 4tl1-7 ms24525-27 e, l, n ms24660-27 7-8, 10-11* 8-9, 11-12* none** off 2-3, 5-6 5 l191 4tl1-21 ms24525-24 e, f, k, m ms24660-24 8-9, 11-12 none** 1-2, 4-5 2-3, 5-6 5 l191 4tl1-31 ms24525-33 e, f, k, m ms24660-33 7-8, 10-11 8-9, 11-12 none** 1-2, 4-5 2-3, 5-6 6 l192 4tl1-51 ms24525-32 e ms24660-32 7-8, 10-11 8-9, 11-12* 1-2, 4-5 off none** 6 l192 4tl1-61 ms24525-38 e ms24660-28 7-8, 10-11* 1-2, 4-5 2-3, 4-5 2-3, 5-6 5 l191 4tl1-10 e all types e 7-8, 10-11 8-9, 11-12 1-2, 4-5 2-3, 4-5 2-3, 5-6 6 l192 4tl1-50 ms27406-2 e, f, k, l, m, n ms27409-2 7-8, 10-11* 7-8, 11-12 8-9, 11-12 1-2, 4-5 2-3, 4-5 2-3, 5-6 6 l192 4tl1-70 e e , l , n e 7-8, 10-11* 8-9, 11-12* 1-2, 4-5 2-3, 4-5 2-3, 5-6 5 l191 4tl1-12 ms27406-1 all types ms27409-1 7-8, 10-11 7-8, 11-12 8-9, 11-12 1-2, 4-5 2-3, 4-5 2-3, 5-6 6 l192 4tl1-72 ms27406-3 e, l, n ms27409-3 7-8, 10-11* 7-8, 11-12 8-9, 11-12* * these positions only are momentary. all others are maintained. ** toggle lever is blocked from these positions. toggle becomes two position, with center being one extreme position. ***also add appropriate suffix letter to the military number. solder turret terminal version how to order 11tl, 12tl, and 14tl type switches with solder turret terminals are qualified to mil-s-3950. they have the same circuitry and electrical ratings as their 1tl, 2tl, and 4tl counterparts. for example, 11tl1-2 i s the same as 1tl1-2, except it has solder turret terminals instead of screw terminals. the complete ms draw- ing numbers are shown in data sheet 204. circuitry type std. lever lever lock one pole 11tl ms27734 ms27737 two pole 612tl ms27735 ms27738 four pole 14tl ms27736 ms27739 toggle/rockers
manual switches tl series toggle switches 1 2 6 honeywel l 1 micr o switc h sensin g an d contro l 1 1 -800-537-694 5 us a 1 f 1 - 8 1 5-235-684 7 internationa l 1 1 -800-737-336 0 canada mounting dimensions (for reference only) one pole two pole four pole note: terminal screws, and mounting hardware (locking ring, lockwasher, and two hexnuts) are furnished unassembled. 0,0 = mm key: 0.00 = inches panel cutout with locking ring without locking ring note: 1 1,4/.06 min deep to accommodate locking ring. 15pa87 panel seal requires blind hole to insure seal integrity bushing mounting torque is 1015 in./lbs. terminal screw mounting torque is 5 in./lbs. max.
|
